Carbide Tipped 45 Deg Laminate Miter Joint Undercutter Assembly 1 3 8 Dia X 1 4 X 1 2 Inch Shank

Description

Eliminate that dark line at the edge of a counter or other laminate-covered surface. With this bit assembly, the laminate cemented to the substrate can be trimmed and mitered in one pass. Then a pre-mitered edging strip can be applied. The resulting seam is clean and crisp. Not intended for use in a laminate trimmer. a. Laminated top is 'under-cut', as shown. b. Apron laminate is pre-cut at 45.° c. Adhere pre-cut laminate for a perfect fit. A fine file may be used to remove the sharp edge after joining.